Candera CGI Studio demo on I-Pi SMARC PX30 devkit

This procedure describes a quick guide for deploying HOMA Demo for Android on I-Pi SMARC PX30

For requirements and how to set up your environment and appropriate utilities, refer to following document:

Android Support documentation for I-Pi SMARC PX30 click here


Hardware Requirement:

  1. I-Pi SMARC PX30 Development Kit
  2. Monitor, Keyboard and Mouse
  3. HDMI Display

Software Requirement

Android as desired OS click here

Refer this link for flashing the Image in to micro SD card

(How to Flash Yocto /Android into the SD Card)

Note: You can also download the Image along with Android and CGI Demo click here.

Step 1: I-Pi SMARC PX30 Connections

Refer this link for I-Pi Connections

Step 2: Deploying

  • Deploying on an Android device simply happens by clicking on APP icon on the home screen

  • You need to connect I-Pi SMARC PX30 with android image by MICRO USB OTG cable to your host computer

  • To get the application working, two files must be deployed on the target device locally which means, the files must be placed in rootfs of the device

    • Application/homa.cfg.sampleà /sdcard/homa.cfg

    • Application/Assets/AssetLibCff_Android_Target.bin à /sdcard/AssetLibCff.bin

This can be done by drag and drop utilizing Explorer or by the adb command line tool on power shell

Refer the below image.


Installing App from Zip package

If you just got a ZIP package containing the APK (android application), asset file and config file, you don’t need any of the steps described before. You only need to install following files:

  • homa-arm64-v8a-debug.apk

  •     homa.cfg
  •     AssetLibCff.bin

You can do this by utilizing explorer by drag and drop, or much more convenient and faster by utilizing adb command on powershell


Note: If you experience an error like shown in following trial, try the -t switch



-g : Grant all permissions during install (not important, just for convenience). If you omit this switch, android will ask you to grant permissions.

-t : Set test Only flag to false. Only necessary if you face the mentioned error.