Express-BASE 7 Plus Carrier Board Industrial Prototyping / Reference Carrier for Off-the-shelf COM Express Type 7 Module This page aims to highlight the capability of the Express-BASE 7 Plus Carrier Board. For the comprehensive information please refer to the user manual. Download User Manual Introduction The Express-BASE7 Plus carrier board is compatible with Basic and Compact form factor of COM Express Type 7 modules pin-out , featuring one PCI Express x16 slot with proprietary pinout for inserting a 10GbE Ethernet Adapter Card (supports up to four 10G signals, dependent on COM Express module specifications), one PCI Express x16 Gen4 slot, and two PCI Express x8 slots. The Express-BASE7 Plus is based on the PICMG COM Express (COM.0 Rev. 3.1) specification. Features Reference carrier board based on COM Express Rev 3.1 Support R3.1 Type 7 modules Basic / Compact size Support 10GbE adapter card (up to 4x 10GBASE-KR and sideband) via PCIe x16 slot Additional Ethernet port on carrier, up to 2.5GbE One PCI Express x16 Gen4 slot with 2nd PCIe clock Additional one PCI Express x4 slot, three PCI Express x1 slots and SATA/USB ports Note: * PCIe speed support depends on the module Specifications Expansion Bus 32x PCIe Lanes* 1x PCIe x16 slot for 10GbE Ethernet Adapter Card 2x PCIe x8 slots LAN Up to 4x 10GBASE-KR and related sideband signals 1 PCI Express x16 slot routes signals from COM Express module 10/100/1000BASE-T compatible RJ-45 on I/O panel USB 4x USB 3.0/2.0 ports on I/O SATA 2x SATA ports on rear Serial Port 2x DB-9 on I/O panel (from Winbond Super I/O) 2x onboard 10-pin header (from COM Express module) KB/Mouse 2x 6-pin mini-DIN Feature Connectors SMBus, I2C, module control signals NC-SI and IPMI BMC Equip IPMI MNC(MiniMBC) for remote management Primary LPC Based Super I/O Use Winbond W83627DHG-PT on LPC bus. Secondary BIOS Onboard socket for secondary SPI flash. Selection of active BIOS can be made by jumper settings. Integrated Debug Port Onboard diagnostics for BIOS POST code data and address on LPC bus Miscellaneous Reset, Power LED, HDD LED, Buzzer Power 100-240V * The Interface and signal compatibility is subject to the module and carrier used. Mechanical and Environmental Form Factor: PICMG® COM.0 Rev. 3.1 Dimensions: 305 mm x 244 mm Operating Temperature: Standard: 0°C to 60°C Rugged: -40°C to 85°C (optional) Humidity: 5-90% RH operating, non-condensing 5-95% RH storage (and operating with conformal coating) Shock and Vibration: IEC 60068-2-64 and IEC-60068-2-27, MIL-STD-202 F, Method 213B, Table 213-I, Condition A and Method 214A, Table 214-I, Condition D HALT Thermal Stress, Vibration Stress, Thermal Shock and Combined Test Functional Diagram