Ubuntu Bionic 18.04 LTS Xfce Desktop Environment

Boot the system with the SD card placed in the slot located on the carrier, once booted you will see the login screen

Screenshot_2020-01-08_11-51-14
Ubuntu is not available for download but has to be compiled by the user himself, please follow [the steps](HowToBuildUbuntu.html) in “build your OS” to do this.

Binary Image download Link

Note:

  1. Auto-login is enabled and no need to enter password.
  2. Please refer to here to guide you how to flash image to SD card.
  3. Boot selector in I-Pi board won’t work due to the design of PX30 booting procedure.

Usernames and passwords

  • two users are defined on the system: root, adlink
  • password is adlink123 for two users

Supported features & interfaces

  • Linux Kernel version: 4.4.167
  • 40 Pin expansion Header with Eclipse Mraa library and Eclipse UPM library which supports C/C++, Python, JAVA and JavaScript
  • SEMA 4.0(Smart Embedded Management Agent) support the functions such as CPU temperature, voltage monitoring total up time, … etc.
  • 2D / 3D Graphics Acceleration with Arm Mali-G31 GPU which supports x11 display server
  • Support H.265, H.264, VP8, MPEG4 and MPEG2 video codec with up to 1080p60fps
  • HDMI output with the resolution up to 1920x1080@60Hz
  • 4 x USB 2.0 ports
  • 2 x 10/100 Mb LAN ports
  • USB OTG Serial Gadget supported (baud rate: 115200)
  • CAN FD Bus interface
  • Analog to Digital input interface
  • Audio & speaker
  • Raspberry Pi Camera V2.1 with 2 Lanes- SONY iMX219 sensor (Datasheet)
  • WIFI/BT USB Dongle (EW-7611ULB datasheet)

Running glmark2-es2 program to benchmark for Mali-G31 with x11

glmark2_ubuntu