Yocto Dunfell with XFCE Desktop Environment

Boot the system with the SD card placed in the slot located on the carrier, once booted you will see the login screen:


Binary Image Download Link


  1. Auto-login is enabled and no need to enter password.
  2. Please refer to here to guide you how to flash image to SD card. 3. Boot selector in I-Pi board won’t work due to the design of PX30 booting procedure.

Usernames and passwords

  • One user is defined on the system: root
  • password is adlink123

Supported features & interfaces

  • Linux Kernel version: 4.4.185
  • 40 Pin expansion Header with Eclipse Mraa library and Eclipse UPM library which supports C/C++, Python, JAVA and JavaScript
  • SEMA 4.0 (Smart Embedded Management Agent) support the functions such as CPU temperature, voltage monitoring total up time, … etc.
  • Support H.265, H.264, VP8, MPEG4 and MPEG2 video codec with up to 1080p60fps
  • HDMI output with resolution 1920x1080@60Hz
  • 4x USB 2.0 ports
  • 2x 10/100 Mb LAN ports
  • USB OTG Serial Gadget supported (baud rate: 115200)
  • CAN FD Bus interface
  • Analog to Digital input interface
  • Audio & speaker
  • Raspberry Pi Camera V2.1 (2 Lanes) - SONY iMX219 sensor (Datasheet)
  • WIFI/BT USB Dongle (EW-7611ULB datasheet)