Ampere Altra Developer Platform

COM-HPC Server Carrier


pcieslots

Download Datasheet

COM-HPC Server carrier is a general purpose carrier for generic COM-HPC server type modules typically used for prototyping purposes.

The carrier is an EATX size and can be mounted into standard EATX capable tower enclosures.

It is powered by off the shelve ATX type power supplies.

Summary of Interfaces

PCIe slots Rear I/O Aux Headers
3x PCIe GEN4 x16 slots 4x USB 3.0 *RS232
2x PCIe x4 GEN4 slots LAN GbE 5x FAN power
2x M.2 M key GEN4 slots LAN GbE (BMC management) Front panel signals
Analog VGA SPI, GPIO
RS232 DB9 2x I2C, SMBus
2x SATA (depends on the module)

*Note: For further information please refer to the datasheet.

Specifications

Core Module Interface

  • PICMG COM-HPC Revision 1.0
  • Support Server Type module in Size E or Size D form factor

Dimension

  • 305 mm x 330 mm (Extended-ATX)

Expansion Busses

  • 2 PCI Express x4 slot (PCIe lane 0-3, 4-7)
  • 2 PCI Express x4 M.2 M key connector (PCIe lane 8-11, 12-15)
  • 3 PCI Express x16 slot (PCIe lane 16-31, 32-47, 48-63)

POST LEDs

  • Onboard IO expander for BIOS POST code data, on I2C bus

Secondary BIOS

  • Onboard socket for secondary SPI flash

Connectors

  • Two x 400-pin (10mm height)

OCP Mezzanine like Ethernet

2 connectors (B,C) on carrier board’s rear side

  • Connector C: 4x KR input (ETH 0-3), support ADLINK OCP Mezzanie like Ethernet card
  • Connector B: 4x KR input (ETH 4-7), support ADLINK OCP Mezzanie like Ethernet card

General Purpose LAN

  • 2500/1000/100/10BASE-T compatible RJ-45 on Rear I/O

  • Note: 2500BASE-T depends on COM-HPC module

Remote Management LAN

  • 1000/100/10BASE-T compatible RJ-45 on Rear I/O

  • Source from the Carrier BMC

Carrier BMC

  • Carrier BMC is for the out-of-band management

SATA

  • 2x SATA (depends on the module)

USB

  • 4x USB 3.2/2.0/1.0 (USB 0-3) Type A connector on Rear I/O
  • 2x USB 2.0 header (USB 5-6) for front panel usage
  • 1x USB 2.0 Vertical connector (USB 7)

Serial Port

  • 1x DB-9 (UART 0) on Rear I/O, 1x onboard 10-pin header (UART 1)

VGA Port

  • 1x VGA on Rear I/O for development purpose(source from Carrier BMC)

FAN

  • 1x 4-pin FAN connector (source from COM-HPC module)
  • 4x 4-pin FAN connector (source from the Carrier BMC)

Feature Connectors

  • Headers for SMBus, 2x I2C, eSPI, GP_SPI, 12x GPIO, IPMB (source from the Carrier BMC)

  • Header for front panel usage

  • Jumpers for module control signals

Miscellaneous

  • Power Button, Reset Button, status LEDs


Functional Diagram

carrier


LED Behavior

led


Label & Color Indication
5VSB (Green) 5VSB of ATX power supply is ready
S3 (Blue) System is not in S0 mode
PWR_ON (Green) System is in S0 mode
WDT (Red) Watch Dog timer (WDT) event
BMC_HB (Orange) BMC heart beat (BMC_HB) Normal behavior of Carrier BMC


System State 5VSB LED S3 LED PWR_ON LED BMC_HB LED
S5 Green Blue OFF Blink
S0 Green OFF Green Blink